Turn your hotel into a benchmark of intelligence, sustainability and comfort.
Optimize operations, cut energy costs by up to 40%, and elevate the guest experience with Innotica's integrated monitoring and control solutions.
Infrastructure as competitive advantage
Running hotel infrastructure without monitoring is like flying without instruments. Innotica gives you the control dashboard your business needs — so every drop of water and every kilowatt builds a better guest experience.
The operational diagnosis
The hidden cost of operating "blind"
Most hotel infrastructures run open-loop: HVAC, pumping, lighting and boilers operate without feedback. That lack of visibility degrades the asset, raises OPEX, and quietly erodes the hospitality promise.
Air handlers and fan-coils working against themselves
Without automatic control, equipment cycles on and off, overloading compressors and slashing their lifespan. Rooms hit the ideal temperature too late — or never.
Up to 90% of electricity is wasted
Leaks and erratic pressure in the hydraulic system
Pumping systems run at the wrong pressures, generating pipe noise and premature wear. Small leaks waste thousands of liters before becoming visible.
Structural damage and outages at peak occupancy
Boilers and gensets running blind
Manual boiler management and lack of substation monitoring expose the hotel to critical outages. Forced ventilation doesn't respond to a build-up of harmful gases.
Operational risk and no hot water at sunrise
Noise and poor air quality degrade your brand
Dirty filters, mismanaged condensation and untuned drives produce allergens, bad smells and mechanical noise — the guest's most frequent complaints, silently eroding reputation.
Ratings drop on booking platforms
Solutions by specialty
A technical answer for every critical subsystem
Four technical fronts, one open architecture. Each Innotica solution plugs into your existing infrastructure over standard protocols (BACnet, Modbus, SNMP) — never locked to a single vendor.
Smart HVAC · AHUs, fan-coils, VRF
Polaris manages chilled-water plants, VRF systems and packaged units. It pre-conditions rooms based on reservation status and modulates ballroom ventilation by occupancy density measured with CO₂ sensors.
Rooms at the right temperature exactly when the guest arrives
Hydraulic management and pumping
Perseo monitors pressures, tank levels and variable-frequency drives. Automatic shut-off on detected leaks in sensitive areas, and perfect pressure in every shower.
Early leak detection, no pipe noise
Electrical infrastructure and backup power
Monitoring of substations, gensets, boilers and fuel systems. Know exactly how much your generators burn and ensure boilers run at peak thermal efficiency.
Operational continuity guaranteed at peak occupancy
Lighting and ambience
Pegasus governs dimmable circuits via DALI and orchestrates scenes. Presence-based, schedule-based and daylight-harvesting strategies — savings without sacrificing atmosphere.
Scenes that enhance space and cut spend
Before
“We see the energy bill at the end of the month, but by then it's too late — and nobody can explain exactly where it came from.”
After
A control dashboard your business can read
Real-time visibility of every subsystem. Auditable historical reports. Automatic alerts before failure reaches the guest. Decisions stop being intuitive and start being data-driven.
The ecosystem
Four platforms, one central brain
Innotica's solutions integrate into a unified BMS over open protocols. Start with one and scale at the pace your cash flow allows.
Polaris
Climate and air quality
Precision control over chilled-water plants, VRF and packaged units. Reservation-based pre-conditioning and CO₂-driven ventilation in event halls.
Perseo
Water resilience
Continuous monitoring of pressure, tank levels and drive status. Automatic shut-off on leak detection to protect infrastructure and guests' belongings.
Castor
Resource accounting
Telemetry of energy, water and fuel with historical reports and real-time carbon-footprint calculation. Data to back investments and certifications.
Pegasus
Lighting and integration
BMS central brain. Smart lighting over DALI, integration with hotel management systems (PMS), and orchestration of every subsystem.
Guest experience
PMS-BMS integration · A hotel that thinks with the guest
Innotica's technology speaks to your hotel management system (Opera, Fidelio, etc.). Check-in stops being paperwork and becomes the start of a personalized, efficient experience.
Check-in
The PMS tells the BMS which room is occupied and when. The system starts thermal, lighting and ventilation pre-conditioning.
Room ready
When the guest arrives, the room is at ideal temperature, with welcome lighting and instant hot water on tap.
Stay
The guest controls climate and lighting from their phone or TV. The system adjusts consumption to presence and saved preferences to drive loyalty.
Check-out
The PMS marks the room free and the BMS automatically switches to total saving mode, ready for cleaning and the next reservation.
Measurable return
Savings you see in the first quarter
Industry studies and our own experience point to a 12–24 month ROI depending on hotel scale and initial infrastructure state.
HVAC energy spend
Reduction of 30 to 50% through setpoint optimization, scheduling, and occupancy-based control of rooms and event halls.
Water consumption
Up to 35% reduction thanks to early leak detection and pressure control in the hydraulic system.
Guest satisfaction
25% increase in surveys on thermal comfort, rest quality, and room environment personalization.
Methodology
From vision to reality in five phases
You don't need to automate the whole hotel at once. We design a master plan that aligns investment with your cash flow, without interrupting operations.
Phase 1
Visit and diagnosis
Walk-through of every system to identify priority improvement opportunities.
Phase 2
Detail engineering
Sensor and controller placement designed without interrupting hotel operations.
Phase 3
Supply and workshop
Programming and bench-testing before reaching site, minimizing install time.
Phase 4
Commissioning
Full integration with existing systems and training for the hotel's technical staff.
Phase 5
Virtual concierge
24/7 external supervision with alerts on any deviation in consumption or critical operation.
Certified sustainability
International framework, tangible value for the guest
LEED
The gold standard of sustainable construction
LEED validates that the hotel was designed and operates under global best practice in efficiency. It attracts the conscious traveler and opens access to green financing.
End-to-end advisory
From schematic design through operations and maintenance.
Energy modeling
Quantitative simulations behind every decision.
Continuous commissioning
Periodic verification of real operational performance.
EDGE
Quick, demonstrable savings
EDGE is the fastest path to certify and show measurable savings in energy, water and materials — and to access preferential green-finance rates.
Quantitative metric
Minimum 20% demonstrable reduction on each axis.
Time to certification
Shorter and less costly process than traditional LEED.
Green-capital access
Documentation recognized by multilateral banks.
WELL
Guest health as a priority
WELL focuses on the human being. Air quality, acoustic and lighting comfort verifiable in real time — the language of the new premium traveler.
PM2.5 and VOC sensors
Continuous indoor air quality monitoring.
Acoustic control
Drive optimization that cuts mechanical noise.
Circadian lighting
Scenes that respect the traveler's biological rhythm.
We don't sell sensors; we sell the peace of mind that every drop of water and every kilowatt is building the best possible experience for your guests.
Request a free operational diagnostic
A 45-minute technical session to identify the three highest-impact opportunities in your hotel — no commitment, with a phased investment plan.